Driver’s Companion
02 Dec 2022 • SPA1227
Color palette for your embroidery with the following thread colors: Very Dark Pewter Gray, Drab Brown, Dark Topaz, Very Light Tan, Very Light Sky Blue, Electric Blue
Image via: Axel Eres
Embroidery Thread & Conversion Chart
Use the embroidery color chart below to convert this palette between three types of thread.
To give you the most accurate representation of every shade, the thread images used on this page are sourced from the official websites of their respective floss manufacturers.
For more information about their threads and available colors, please visit their website at DMC or Anchor Crafts
Please note that a perfect conversion is not always possible due to the limited colors provided by manufacturers. You can see my suggestions below for the closest representation of the palette across different brands, but feel free to adapt these shades to suit your project.
Hex, RGB and CMYK Color Details
Use the chart below to copy color codes for your specific needs.
If your design project is ultimately going to be displayed on a digital screen, use the HEX or RGB values from the chart below. This applies for a wide variety of modern devices such as smartphones, tablets, computers or even TVs.
Use the CMYK color codes for your design if that will be physically printed on paper. The CMYK color mode will give you more accurate results, as most commercial printers are configured to use these values for the printing process.
DMC 6 Strand Floss
Very Dark Pewter Gray
3799
Drab Brown
611
Dark Topaz
782
Very Light Tan
738
Very Light Sky Blue
747
Electric Blue
3843
DMC Tapestry Wool
7624
7518
7767
7739
7928
7996
Anchor Stranded Cotton
00236
00889
00308
00361
00158
01089
Cosmo Size 25 Floss
601
368
705A
306
561
413
Quick disclosure: this post contains affiliate links which means I get a tiny commission if you purchase after clicking. This comes at no extra cost to you and helps me keep this site running by creating new posts & palettes regularly. Thank you for your support.
Pick a Fabric Color
Choose a fabric color that works well with your threads
How to use this section
First step is to adjust the vertical slider to your desired color in the color picker below. Next, control the lightness/darkness of your selected color by dragging the white circle pointer to any location on the picker surface. A preview of your selected color will be shown on the left, comparing it to your previously selected color. Alternatively, click on one of the pre-defined colors just below the picker surface. Once you are happy with your new color, click the Save button. This will change the fabric color behind your threads.
Share this image
