Flash And Color
18 Jun 2020 • SPA0330
Color palette for your embroidery with the following thread colors: Very Dark Emerald Green, Medium Emerald Green, Medium Parrot Green, Light Parrot Green, Royal Blue, Dark Royal Blue
Image via: Michael Dziedzic
Embroidery Thread & Conversion Chart
Use the embroidery color chart below to convert this palette between three types of thread.
To give you the most accurate representation of every shade, the thread images used on this page are sourced from the official websites of their respective floss manufacturers.
For more information about their threads and available colors, please visit their website at DMC or Anchor Crafts
Please note that a perfect conversion is not always possible due to the limited colors provided by manufacturers. You can see my suggestions below for the closest representation of the palette across different brands, but feel free to adapt these shades to suit your project.
Hex, RGB and CMYK Color Details
Use the chart below to copy color codes for your specific needs.
If your design project is ultimately going to be displayed on a digital screen, use the HEX or RGB values from the chart below. This applies for a wide variety of modern devices such as smartphones, tablets, computers or even TVs.
Use the CMYK color codes for your design if that will be physically printed on paper. The CMYK color mode will give you more accurate results, as most commercial printers are configured to use these values for the printing process.
DMC 6 Strand Floss
Very Dark Emerald Green
Medium Emerald Green
Medium Parrot Green
Light Parrot Green
Dark Royal Blue
DMC Tapestry Wool
Anchor Stranded Cotton
Cosmo Size 25 Floss
Quick disclosure: this post contains affiliate links which means I get a tiny commission if you purchase after clicking. This comes at no extra cost to you and helps me keep this site running by creating new posts & palettes regularly. Thank you for your support.
Pick a Fabric Color
Choose a fabric color that works well with your threads
How to use this section
First step is to adjust the vertical slider to your desired color in the color picker below. Next, control the lightness/darkness of your selected color by dragging the white circle pointer to any location on the picker surface. A preview of your selected color will be shown on the left, comparing it to your previously selected color. Alternatively, click on one of the pre-defined colors just below the picker surface. Once you are happy with your new color, click the Save button. This will change the fabric color behind your threads.
Leave a Reply